Rupert Neve Designs 5017 Features:

• Two Channel OperationWith two transformer coupled outputs, the 5017 has separate line outputs for the DI/Blend and Mic signals when the blend control is set to fully DI. The mic output is always independent.
• SilkMuch could be written about this feature, suffice to say, that it gives a subtle option to enhance sound quality in the direction of vintage modules. The silk button reduces negative feedback and adjusts the frequency spectrum to provide a very sweet and musical performance. We suggest you try it and make your own judgment.
• Mic GainMic gain is from 0dB to 66dB. Overall gain to restore the apparent program level
• DI GainDI Gain is from 0dB to 30dB
• DI inputBalanced or unbalanced Hi-Z input for instruments
• High pass filterThe high pass filter is a valuable aid in any signal chain but particularly so in a microphone preamplifier. Signals below 80hz can be attenuated at a rate of 12db / octave, getting rid of building rumble, air handling motor hum etc.
• Phantom powerProvides 48v phantom power to microphones. Controlled by a switch on the back of the unit.
• Phase invertReverses the polarity of the mic input
• ThresholdWhen signals exceed the “threshold”? level, the gain is reduced at a controlled 2:1 ratio, with attack and release time constants set to standard or fast depending on the internal jumper setting.